Black & Decker MZ30PGSSI, User Manual

Page: 7 / 25

English
-7-
Assembly (Fig. B )
Warning! Before assembly, make sure that
the appliance is switched off and
unplugged.
• Place the appliance on a flat, even
surface.
• Open the door (6) & place the turntable
shaft into the hole in the cavity base.
• Place the roller support (3) into the
recess in the cavity. Place the tray (4) on
top of the roller support.
• Connect the appliance to a suitable
electrical supply.
Setting the Clock
When the oven is connected to the electri-
cal supply, the LED will display "0:00".
• Press the "Clock / Pre-set" button.
The symbol will be shown in the
display and the hour figures will flash.
• Rotate the control dial (12) to select the
required hour. The input time must be
between 0 and 23.
• Press the "Clock / Pre-set" button
again. The minute figures will flash
• Rotate the control dial (12) to select the
required minute figures. The input time
must be between 0 and 59.
• To finish setting the clock, press “Clock /
Pre-set” button one more time.
The symbol “:” will flash in the display
and the set time will be shown.
Note: If the "Stop / Clear" button is
pressed while setting the clock, the oven
will revert to its previous state automati-
cally.
Use (Fig. C)
Open the oven door then place the
container onto the tray (4) then close the
door.
Press the "Microwave" button. The
display will show “P100” “ ”and “ “.
To change the microwave power, either
press the “Microwave”
button
repeatedly, or rotate the control dial (12)
until the required power is shown in the
display, Then press the “Start / + 30 Sec. /
Confirm” button.
Set the required cooking time using the
control dial (12), then press the “Start / +
30 Sec. / Confirm”
button again to
start cooking.
Note: When the control dial is rotated, the
time will increase in by different values as
shown below:
Grill and Combi. Cooking
Press the "Grill / Combi" button. The
LED will display " " and" ".
Press the Grill / Combi button
repeatedly, or rotate the control dial (12) to
select the required power - "
","C-1" or
"C-2" will be shown in the display. Press
the "Start / +30 Sec. / Confirm"
button then set the cooking time using the
control dial. The cooking time can be set
between 5 seconds and 95 minutes.
Time Step
0 - 1 minute : 5 seconds
1 - 5 minutes : 10 seconds
5 - 10 minutes : 30 seconds
10 - 30 minutes : 1 minute
30 - 95 minutes : 5 minutes
Setting Microwave Display
Power
1 100% P100
2 80% P80
3 50% P50
4 30% P30
5 10% P10
Microwave
Microwave
Grill/Combi.
Grill/Combi.
Clock/Pre-Set
Clock/Pre-Set
Clock/Pre-Set
Stop/Clear
Start
+30Sec/Confirm
Start
+30Sec/Confirm
Start
+30Sec/Confirm