English
-7-
Assembly (Fig. B
)
Warning!
Before assembly, make sure that
the appliance is switched off and
unplugged.
• Place the appliance on a flat, even
surface.
• Open the door (6) & place the turntable
shaft (2) into the hole in the cavity base.
The door is opened by pressing the door
release (8).
• Fit the roller support (3) onto the
turntable shaft (2), ensuring it engages
fully. Place the tray (4) on top of the roller
support.
• Connect the appliance to a suitable
electrical supply.
Setting the Clock
When the microwave oven is connected to
a suitable electrical supply, the oven will
display "0:00". To set the correct time, for
example: To set 8:00.
1 Press the "Clock/Pre-set"
button .
The hour figures will flash and “ ” will
be shown in the display.
2 Press the number buttons "8","0","0" in
order.
3 Press "Clock/Pre-set"
button
again to finish setting the clock. The
symbol“ ” will go out, ":" will flash,
and the time will be shown in the display.
Note:
If "Stop/Clear"
button is pressed
or if there is no operation within 1 minute,
the oven will revert to its previous state
automatically.
Delayed Cooking:
This appliance can be programmed to start
cooking at a pre-set time.
To do this, first select the required program
as described in “Auto menu Cooking” .
Press "Clock/Pre-set"
button to
display the current time. The hour figures
will flash.
Enter the required start time using the
numeric buttons.
Press the "Start/Express Cook"
button
to confirm the setting. The LED will show
the current time.
When the set time coincides with the
actual time shown on the LED, the audible
signal will be heard twice and cooking will
start.
Note:
The time set must be between 0:00
and 23:59.
Note:
Do not operate the appliance when
empty. This could damage the oven.
Note:
If the "Stop / Clear"
button is
pressed while setting the start time, or if
there is no operation within 1 minute, the
appliance will revert to the previous state
automatically.
Note:
The clock must be set before using
Delayed Cooking.
Note:
Do not use this feature to defrost
frozen items.
Note:
After setting the Microwave to cook
at a later time, pressing the "Clock/Pre-set"
button will cause the pre-set time to
flash in the LED for 2-3 seconds. The
Microwave will then revert to the clock
display.
Use (Fig. C)
Press the door release (8) to open the oven
door then place the container onto the tray
(4).
Close the door & press the Microwave
button repeatedly until the required power
setting is shown in the LED display.
Level Power Display
1
100%
P100
2
80%
P80
3
50%
P50
4
30%
P30
5
10%
P10
STOP
CLEAR
STOP
CLEAR
START
EXPRESS COOK
