English
-6-
Inspection and repairs
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
Electrical safety
This product must be earthed.
Always check that the power supply
corresponds to the voltage on the rating
plate
Power plugs must match the outlet. Never
modify the plug in any way. Do not use any
adaptor plugs with earthed (Class l)
appliances. Unmodified plugs and
matching outlets will reduce the risk of
electric shock.
Never operate an appliance directly below
the socket-outlet it is connected to.
Do not insert any object into the openings
on the outer case.
Extension cables & Class l product
• A 3-core cable must be used as your
appliance is earthed and of Class l
construction.
• Up to 30m (100 ft) can be used without
loss of power.
• If the supply cord is damaged, it must
be replaced by the manufacturer or an
authorised Black & Decker Service
Centre in order to avoid a hazard.
Features (Fig. A)
1 Control panel
2 Turntable shaft
3 Roller support
4 Glass tray
5 Observation window
6 Door
7 Safety interlock system
8 Door Handle
• Remove all packaging from the
appliance.
• Mica Plate, Do not remove
• Inspect the oven after unpacking for any
damage such as a misaligned or
damaged door, dents or holes in the
door window and screen, and any dents
in the cavity. If any of these are seen,
DO NOT use the oven.
• Clean the appliance before first use.
Assembly (Fig. B)
Warning!
Before assembly, make sure that
the appliance is switched off and
unplugged.
• Place the appliance on a flat, even
surface.
• Open the door (6) & place the stem into
the hole in the cavity base.
• Place the roller support (3) into the hole
in the cavity.
• Align the glass tray (4) on top of the
roller support.
• Connect the appliance to a suitable
electrical supply.
