Black & Decker LHT341 Instruction Manual Download Page 3

3

g)

 

If devices are provided for the 

connection of dust extraction and 

collection facilities, ensure these 

are connected and properly used.

 

Use of dust collection can reduce dust-

related hazards.

4)

 

Power Tool uSe and care

a)

 

do not force the power tool. use 

the correct power tool for your 

application.

 

The correct power tool will 

do the job better and safer at the rate 

for which it was designed.

b)

 

do not use the power tool if the 

switch does not turn it on and 

off.

 

Any power tool that cannot 

be controlled with the switch is 

dangerous and must be repaired

.

c)

 

disconnect the plug from the power 

source and/or the battery pack from 

the power tool before making any 

adjustments, changing accessories, 

or storing power tools. Such preventive 

safety measures reduce the risk of 

starting the power tool accidentally.

d)

 

Store idle power tools out of 

the reach of children and do not 

allow persons unfamiliar with the 

power tool or these instructions 

to operate the power tool. Power 

tools are dangerous in the hands of 

untrained users.

e)

 

Maintain power tools. check for 

misalignment or binding of moving 

parts, breakage of parts and any 

other condition that may affect the 

power tool’s operation. If damaged, 

have the power tool repaired before 

use. Many accidents are caused by 

poorly maintained power tools.

f)

 

keep cutting tools sharp and clean. 

Properly maintained cutting tools with 

sharp cutting edges are less likely to 

bind and are easier to control.

g)

 

use the power tool, accessories 

and tool bits, etc. in accordance 

with these instructions, taking into 

account the working conditions 

and the work to be performed.

 

Use of the power tool for operations 

different from those intended could 

result in a hazardous situation.

5) BaTTery Tool uSe and care

a)  recharge only with the charger 

specified by the manufacturer. 

charger that is suitable for one type of 

battery pack may create a risk of fire 

when used with another battery pack.

b)  use power tools only with 

specifically designated battery 

packs.

 Use of any other battery 

packs may create a risk of injury and 

fire.

c)  when battery pack is not in use, 

keep it away from other metal 

objects like paper clips, coins, keys, 

nails, screws, or other small metal 

objects that can make a connection 

from one terminal to another. 

Shorting the battery terminals together 

may cause burns or a fire.

d) under abusive conditions, 

liquid may be ejected from the 

battery, avoid contact. If contact 

accidentally occurs, flush with 

water. If liquid contacts eyes, 

additionally seek medical help. 

Liquid ejected from the battery may 

cause irritation or burns.

6)

 

ServIce

a) Have your power tool serviced by a 

qualified repair person using only 

identical replacement parts. This will 

ensure that the safety of the power 

tool is maintained.

Hedge Trimmer SafeTy warningS

danGer:

 keep hands away from 

blade. 

Contact with blade will result in 

serious personal injury.

•  Use both hands when operating the 

hedge trimmer. using one hand could 

cause loss of control and result in 

serious personal injury.

•  Keep all parts of the body away from 

the cutter blade. do not remove 

cut material or hold material to be 

cut when blades are moving. Make 

sure the switch is off when clearing 

jammed material. Blades coast after 

turn off. 

A moment of inattention while 

operating the hedge trimmer may result 

in serious personal injury.

warnInG:

 Only use with bail handle 

and guard properly assembled to hedge 

trimmer. The use of the hedge trimmer 

without the proper guard or handle provided 

may result in serious personal injury.

•  Carry the hedge trimmer by the handle with 

the cutter blade stopped. Proper handling 

of the hedge trimmer will reduce possible 

personal injury from the cutter blades.

•  Hold the power tool by insulated 

gripping surfaces only, because the 

cutter blade may contact hidden 

wiring. Cutter blades contacting a “live” 

wire may make exposed metal parts of 

the power tool “live” and could give the 

operator an electric shock.

  keep extension cord away from 

cutting area. During operation the 

extension cord may be hidden in shrubs 

and can be accidentally cut by the blade.

•  Check the hedge for foreign objects, 

e.g. wire fences.

cauTIon:

 

Do not expose to rain.

warnInG: 

Remove plug from the 

Summary of Contents for LHT341









































Reviews: