Black & Decker KC1036, Manual

Page: 8 / 12

8
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment:
u
Do not short-circuit the battery terminals.
u
Do not dispose of the battery(s) in a fire as this may result
in a risk of personal injury or an explosion.
u
Run the battery down completely, then remove it from the
tool.
u
Batteries are recyclable. Place the battery(s) in a suitable
packaging to ensure that the terminals cannot be
short-circuited. Take them to any authorised repair agent
or a local recycling station.
Technical data
KC1036
Voltage V
DC
3.6
No-load speed min
-1
180
Max. torque Nm 3 . 4
Bit holder 1/4" (6.35 mm hex)
Weight kg 0.45
Charger *A050020D
Input voltage V
AC
230
Output voltage V
AC
5
Current mA 200
Approx. charging time h 10
Battery
Capacity Ah 1.0
Battery type NiCd
Voltage V
DC
3.6
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 62.5 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 73.5dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Screwdriving without impact (a
h, S
) 2.5 m/s
2
, uncertainty (K) 1.5 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
%
KC1036
Black & Decker declares that these products described under
"technical data" are in compliance with:
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009), EN 60745-1, EN 60745-2-2
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
_
Kevin Hewitt
Vice-President Global Engineering
Black & Decker Europe, 210 Bath Road, Slough,
Berkshire, SL1 3YD
United Kingdom
1-12-2009