22
EnGLIsH
Fitting Sanding Disc (Fig. B)
• Place the tool on a table, with the spindle
6
facing up.
• Place the sanding disc
5
onto the spindle.
• Place the washer
7
onto the spindle as shown. Make sure
the raised portion of the washer faces outwards.
• Fit the screw
8
onto the spindle.
• Hold the sanding disc steady and tighten the screw using
the hex key
9
.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.
Description (Fig. A)
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury could result.
1
ON/OFF switch
2
Lock‑on button
3
Variable speed control knob
4
Dust extraction outlet
5
Sanding disc
6
Spindle
7
Washer
8
Screw
9
Hex key
10
Dustbag
11
Hose
12
Front handle
13
Main handle
14
Date code
Intended Use
This random orbit sander is designed for sanding wood, metal,
plastic and painted surfaces.
Do not use under wet conditions or in the presence of
flammable liquids or gases.
Do not let children come into contact with the tool. Supervision
is required when inexperienced operators use this tool.
•
Young children and the infirm.
This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Date Code Position (Fig. A)
The date code
14
, which also includes
the year of manufacture,
is printed into the housing.
Example:
2022 XX XX
Year and Week of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear ear protection.
f
Wear eye protection
Package Contents
The package contains:
1 Random orbit sander
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
If the supply cord is damaged, it must be replaced only by
BLACK+DECKER
or an authorised service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.
• Connect the green/yelow lead to the earth terminal.
WARNING:
We recommend the use of a residual current
device with a residual current rating of 30mA or less.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data
).The minimum conductor size is 1.5 mm
2
; the
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
Summary of Contents for KA191EK
