35
ENGLISH
Item
Description
240 grit large detail sanding
sheet with two replacement
tips.
For a
fi
ne
fi
nish for large detail
sanding.
120 grit large detail sanding
sheet with two replacement
tips.
For a medium
fi
nish for large
detail sanding.
60 grit large detail sanding
sheet with two replacement
tips.
For a coarse
fi
nish for large detail
sanding.
High-gloss large detail
fi
nish sheet (grey) with two
replacement tips.
For applying polish.
Cleaning sheet (red) for wood
or metal with two replacement
tips.
For cleaning or polishing tasks
on wood or metal.
120 grit detailed
fi
nger sanding
sheet.
For a medium
fi
nish for detailed
sanding.
120 grit pro
fi
le sanding sheet.
For a medium
fi
nish for pro
fi
le
sanding.
Assembly
Warning!
Before assembly, make sure that the tool
is switched off and unplugged.
Fitting sanding sheets (
fi
g. A & B)
♦
Detach the two additional diamond-shaped tips
(10) from the sanding sheet (11).
♦
Hold the tool with the sanding base facing
upwards.
♦
Place the sanding sheet (11) onto the sanding
base, making sure that the holes in the sheet
line up with the holes in the base.
The diamond-shaped tip (10) can be reversed and
replaced when worn.
♦
When the front part of the tip is worn, detach it
from the sheet, reverse it and press it onto the
sanding base again.
♦
When the whole tip is worn, remove it from the
sanding base and
fi
t a new tip.
♦
The polishing foam and pads (12) can be
fi
tted
the same way as the sanding sheets.
For optimal dust collection, ensure the correct type
of sanding paper is used.
Tip of the sanding base (
fi
g. C)
When the sanding base tip (5) or tip holder (4) is
worn, it can be reversed or replaced. Spare parts
are available from your BLACK+DECKER dealer.
♦
Remove the screw (8).
♦
Reverse or replace the worn part.
♦
Fit and tighten the screw.
Finger attachment (
fi
g. D)
The
fi
nger attachment is used for
fi
ne detail
sanding.
♦
Remove the screw (8).
♦
Remove the diamond-shaped tip holder (4)
from the sanding base.
♦
Fit the
fi
nger attachment (6) onto the sanding
base.
♦
Fit and tighten the screw.
♦
Fit the appropriate sanding sheet onto the
fi
nger attachment.
Pro
fi
le attachment (
fi
g. E)
The pro
fi
le attachment is used for contour sanding.
♦
Remove the screw (8).
♦
Remove the diamond-shaped tip holder (4)
from the sanding base.
♦
Fit the pro
fi
le attachment (7) onto the sanding
base.
♦
Fit and tighten the screw.
Fitting and removing a sanding pro
fi
le
(
fi
g. F1 & F2)
♦
Choose the sanding pro
fi
le most suitable for
your application.
♦
Place one end of the sanding pro
fi
le (9) into
the recess at the front end of the pro
fi
le holder
(7).
♦
Push the other end of the sanding pro
fi
le until
it clicks into place.
♦
To remove the sanding pro
fi
le, push it forward
and pull the rear end out of the pro
fi
le holder
(
fi
g. F2).
Fitting a sanding sheet onto a sanding pro
fi
le
(
fi
g. G)
♦
Align the sanding sheet with the sanding pro
fi
le
(9).
♦
Press the sanding sheet onto the sanding
pro
fi
le, making sure that the sanding sheet
follows the shape of the pro
fi
le.
