7
4.
LEVEL HEDGES
(Figure I)
– To obtain exceptionally
level hedges, a piece of string can be stretched along
the length of the hedge as a guide.
5.
SIDE-TRIMMING HEDGES
(Figure J)
– Begin at the bottom
and sweep up.
WARNING
:
TO GUARD AGAINST INJURY, OBSERVE THE
FOLLOWING:
• READ INSTRUCTION MANUAL BEFORE USING, SAVE
INSTRUCTION MANUAL.
• CHECK THE HEDGE FOR FOREIGN OBJECTS SUCH AS
WIRE OR FENCES BEFORE EACH USE.
• KEEP HANDS AWAY FROM BLADES.
• KEEP HANDS ON HANDLES. DONʼT OVERREACH.
•
CAUTION:
– BLADE COASTS AFTER TURN OFF.
• DO NOT USE UNDER WET CONDITIONS.
• DO NOT USE WITH DAMAGED EXTENSION CORD.
• DO NOT UNPLUG OR STORE WITH SWITCH LOCKED ON.
DANGER:
KEEP HANDS AWAY FROM BLADES.
CAUTION:
BLADE COASTS AFTER TURN OFF.
I
J
TROUBLESHOOTING
Problem
Possible Cause
Possible Solution
• Unit will not start.
• Cord not plugged in.
• Plug tool into a working
outlet.
• Circuit fuse is blown.
• Replace circuit fuse.
(If the product repeatedly
causes the circuit fuse to
blow, discontinue use
immediately and have it
serviced at a Black &
Decker service center or
authorized servicer.)
• Circuit breaker is tripped.
• Reset circuit breaker.
(If the product repeatedly
causes the circuit
breaker to trip,
discontinue use
immediately and have it
serviced at a Black &
Decker service center or
authorized servicer.)
• Cord or switch is damaged.
• Have cord or switch
replaced at Black
& Decker Service Center
or Authorized Servicer
For assistance with your product, visit our website
www.blackanddecker.com
for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
