6
ENGLISH
(Original instructions)
Using an extension cable
Always use an approved extension cable suitable for the
power input of this tool (see technical data). The extension
cable must be suitable for outdoor use and marked
accordingly. Up to 30 m of 1.5 mm² HO5V V-F extension cable
can be used without loss of product performance. Before use,
inspect the extension cable for signs of damage, wear and
ageing. Replace the extension cable if damaged or defective.
When using a cable reel, always unwind the cable completely.
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
u
Injuries caused by touching any rotating/moving
parts.
u
Injuries caused when changing any parts, blades or
accessories.
u
Injuries caused by prolonged use of a tool. When
using any tool for prolonged periods ensure you take
regular breaks.
u
Impairment of hearing.
u
Health hazards caused by breathing dust developed
when using your tool (example:- working with wood,
especially oak, beech and MDF.)
Labels on Appliance
The following pictograms are shown on the tool:
Warning! Read the manual prior to operation.
Wear safety glasses or goggles when operating this
appliance.
Wear suitable ear protection when operating this
appliance.
R
Do not expose the tool to rain or high humidity or
leave outdoors while it is raining..
Switch off: remove plug from mains before cleaning
or maintenance.
Keep bystanders away.
Features
1. On/off switch
2. Cable restraint
3. Collection bag
4. Blow clamshell
5. Blow tube
6. Scraper
7. Vacuum tube - lower
8. Vacuum tube - upper
9. Release button
10. Powerhead
Assembly
@
Warning! Before assembly, make sure that the
appliance is switched off and unplugged.
@
Warning! Always wear protective gloves when
working with your blow vac.
Vacuum tube assembly (fig. A)
The vacuum tubes must be assembled together before use.
Warning! Do not operate the appliance with the vacuum tubes
separated.
u
To ease assembly, apply a soapy water solution to the
joint area.
u
Align the notches (11) and the triangles (12) on the upper
(8) and lower (7) vacuum tubes.
u
Push the lower vacuum tube (7) firmly into the upper
vacuum tube (8) until the triangles click into place.
Warning! Do not separate the tubes once assembled.
Blow tube assembly (fig. B)
The blow tube (5) must be assembled to the blow clamshell
(4) before use.
u
Align the circles (13) on the blow clamshell (4) and the
blow tube (5).
u
Push the blow tube (5) firmly onto the blow clamshell (4)
until the circles (13) click into place.
Warning! Do not separate the tubes once assembled.
Use
Switching on and off (fig. C)
Warning!
Use both hands to grip the product firmly when
switching on.
u
To switch the appliance on, slide the on/off switch (1.1)
forward.
