Black & Decker GT305. GT320, Use And Care Book Manual, Page: 4 / 23

BREWING A CUP OF COFFEE
1. Remove the water reservoir and fill with water
to desired size (F) .
2. Insert water reservoir back into the unit.
3. Unlock the lid by pressing the OPEN release lever
to the open position.
4. Place appropriate pod holder in the unit (G)
(see Brewing Tips chart on page 7).
5. Insert appropriate pod into the pod holder (H)
(see Brewing Tips chart on page 7).
IMPORTANT: Only an individual Home Café ™ creamy
pod can be used in the creamy pod holder. Otherwise,
unit malfunction can occur.
DO NOT USE a single regular coffee pod in a creamy pod
holder or in combination with a creamy pod.
6. Close the lid.
7. Place cup on the cup tray. If using a tall cup or mug,
remove the drip tray (J) .
Caution: Cup tray might get hot from previous brew; be
sure it has cooled completely before touching it.
8. Press the desired brew button. The brew button light
blinks then it remains on until the brewing cycle
is finished.
Important: Make sure that your cup size matches your brew selection (for
example; use a 9 ounce cup for a 7-oz. brew selection), otherwise you might
have an overflow (for example; do not use 8 ounces for a 14-oz. brew selection).
9. When the brew button indicator light goes out, remove the filled cup
from the cup tray.
10. To dispose of used pod, unlock lid and remove the pod.
Important Tip
The lid on your unit automatically stays locked during the brewing cycle, if there
is a power failure or if it stops unexpectedly.
To unlock the lid:
1. Wait until the flashing light goes out and you hear the unit beep, then press the
OPEN release lever on the lid. The lid opens.
2. Insert a new pod, close the lid and start a new brew cycle with an empty cup
to avoid overflow.
6 5
How to Use
This appliance is for household use only.
Wash removable parts as instructed in the Care and Cleaning section.
PREPARING UNIT FOR FIRST USE
1. Remove the water reservoir from the back of the
unit (A) .
2. Remove reservoir lid and fill reservoir with water to the
MAX line. Do not overfill.
3. Press the OPEN lid release lever to unlock the lid (B) .
4. Insert a pod holder without using any coffee pods (C) .
5. Close the lid by pressing down until you hear it snap
in place (D) .
6. With lid in place, slide reservoir down securely.
7. Place a 14-oz. or larger cup on the cup tray (E) .
8. Plug in the unit.
9. Press the CLEAN button. The blue indicator light blinks
then changes to steady blue. Once the priming cycle
is finished the unit beeps 3 times and the blue light
goes out.
Note: During the priming cycle, the unit may be loud and create a larger than
normal amount of steam. This is normal.
Now your unit is ready for use!
A
G
H
J
B
C
D
E
F
GT300Pub1000001930R3 8/23/06 2:56 PM Page 6