Black & Decker GC818, Instruction Manual

Page: 11 / 40

11
english
When cleaning, DO NOT immerse tool in water or spray it with a hose.
MAINTENANCE
Your Black & Decker tool has been designed to operate over a long period of time with
a minimum of maintenance. Continuous satisfactory operation depends upon proper
tool care and regular cleaning.Your charger does not require any maintenance apart
from regular cleaning.
Warning! Before performing any maintenance on the tool, remove the battery from the
tool. Unplug the charger before cleaning it.
• Regularly clean the ventilation slots in your tool and charger using a soft brush or
dry cloth.
• Regularly clean the motor housing using a damp cloth. Do not use any abrasive or
solvent-based cleaner.
• Regularly open the chuck and tap it to remove any dust from the interior.
Protecting the environment
Separate collection. This product must not be disposed of with normal household
waste.
Should you find one day that your Black & Decker product needs replacement, or
if it is of no further use to you, do not dispose of it with household waste. Make this prod-
uct available for separate collection.
Separate collection of used products and packaging allows materials to be
recycled and used again. Re-use of recycled materils helps prevent
environmental pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of electrical products from the
household, at municipal waste sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and recycling of Black & Decker
products once they have reached the end of their working life. To take advantage of this
service please return your product to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest authorised repair agent by contacting your
local Black & Decker office at the address indicated in this manual. Alternatively, a list
of authorised Black & Decker repair agents and full details of our after-sales service and
contacts are available on the Internet at:
www.2helpU.com
Batteries
Run the battery down completely, then remove it from the tool.
• NiCd, NiMH and Li-Ion batteries are recyclable. Take them to any authorised
repair agent or a local recycling station.
Service Information