Stainless Steel blade for chopping, beating,
creaming, crumbling, cutting, folding in,
mashing, mincing and mixing.
Shredding and Slicing disc for grating and
shredding vegetables, fruits and cheese. The
reverse side of this disc is used for cutting
and slicing vegetables and fruits.
Fanned disc for whisking, whipping and
emulsifying.
Separate blade for kneading dough.
** Blender for blending, crushing, foaming,
grinding, pureeing, homogenizing,
liquidizing, milling, shaking and stirring.
• This appliance is intended to be used in
household and similar applications.
• This appliance is not intended to be used
in
• Staff kitchen areas in shops, offices and
other working environments;
• Farm houses;
• By clients in hotels, motels and other
residential type environments;
• Bed and breakfast type environments; or
any other non-household environments.
After use
• Remove the plug from the socket before
leaving the appliance unattended and
before changing, cleaning or inspecting
any parts of the appliance.
• When not in use, the appliance should be
stored in a dry place. Children should not
have access to stored appliances.
Inspection and repairs
• Switch off the appliance before cleaning,
changing accessories or approaching
parts which move in use
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may affect
its operation.
5
ENGLISH
(Original instructions)
• Do not use the appliance if any part is
damaged or defective.
• Do not use the appliance if the blade is
damaged.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply cord
for signs of damage, ageing and wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged or
defective.
• If the power supply cord or mains plug is
damaged or defective it must be repaired
by an authorised repair agent in order to
avoid a hazard. Do not cut the power
supply cord and do not attempt to repair
it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live
terminal of the new plug.
• Connect the blue lead to the neutral
terminal.
• If the product is class I (earthed), connect
the green/yellow lead to the earth
terminal.
Warning
! If your product is class II double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth
terminal
• Follow the fitting instructions supplied
with good quality plugs
• Any replacement fuse must be of the
same rating as the original fuse supplied
with the product.
Warning
! The above section on mains plug
replacement is for authorized service centre
personals.
