5
ENGLISH
(Original instructions)
Technical data
FSS1600
(Type 1)
Voltage
V
ac
230
Power
W
1600
Tank capacity
ml
350
Weight
kg
2.5
Troubleshooting
If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local Black & Decker repair agent.
Problem
Step
Possible solutions
The hand held
steam cleaner is
not turning on.
1
Check the unit is plugged in at the wall
socket.
2
Check the unit is switched on using the on/
off switch (1).
3
Check the fuse in the plug.
No steam is being
produced from the
hand held steam
cleaner when the
trigger is pulled.
4
The hand held steam cleaner has a lock off
feature. Lift the lock off switch (2) and pull
the trigger switch (3). After a few seconds
steam will be produced.
5
Check that the water tank (5) is full.
NOTE: When first filled or after running dry it
can take up to 45 seconds for steam to be
produced.
6
Check steps 1, then 2, then 3.
The hand held
steam cleaner
stops producing
steam during use.
7
Check steps 5, then3.
The hand held
steam cleaner is
producing too little
steam during use.
8
Check step 5.
9
The hand held steam cleaner will begin to
produce steam after 15 seconds and will
reach maximum steam flow after 45
seconds.
The accessories
keep falling off the
unit.
10
Refer to the assembly chapter of the manual
for correct fitting instructions of all parts and
accessories.
Steam is escaping
from unexpected
areas of the unit.
11
Refer to the assembly chapter of the manual
for correct fitting instructions of all parts and
accessories.
Problem
Step
Possible solutions
Where can I get
further information
/ accessories for
my steam mop.
12
www.blackanddecker.co.uk/steammop
www.blackanddecker.ie/steammop