6
Warning!
Drill may stall (if overloaded or improperly
used) causing a twist. Always expect the stall. Grip the drill
firmly to control the twisting action and prevent loss of
control which could cause personal injury. If a stall does
occur, release the trigger immediately and determine the
reason for the stall before re-starting.
OPERATING INSTRUCTIONS
Variable Speed Trigger Switch (Fig. 1)
To turn the tool on, squeeze the trigger switch. To turn the
tool off, release the trigger switch. Your tool is equipped
with a brake. The chuck will stop as soon as the trigger
switch is fully released. The variable speed switch enables
you to select the best speed for a particular application. The
more you squeeze the trigger, the faster the tool will
operate. Use lower speeds for starting holes without a
center punch, drilling in metals or plastics, or driving
screws. For maximum tool life, use variable speed only for
starting holes or fasteners.
NOTE: Continuous use in variable speed range is not
recommended. It may damage the switch and should be
avoided.
Forward/Reverse Control Button (FIG. 1)
A forward/reverse control button determines the direction of
the tool and also serves as a lock off button. To select
forward rotation, release the trigger switch and depress the
forward/reverse control button on the right side of the tool.
To select reverse, depress the forward/reverse control
button on the left side of the tool. The center position of the
control button locks the tool in the off position. When
changing the position of the control button, be sure the
trigger is released.
Quick Release Chuck – (FIG. 2)
NOTE:
The chuck accepts 1/4 in. (6.35 mm) hex accesso-
ries only.
Place the switch in the locked off (center) position or
remove battery pack before changing accessories.
To install an accessory
, pull the chuck collar away from
the front of the tool, insert the accessory, and release the
collar. The accessory is locked in place.
To remove an accessory
, pull the chuck collar away from
the front of the tool, remove the accessory and release the
collar.
MAINTENANCE
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
• Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Never let any liquid get inside the tool and never
immerse any part of the tool into liquid.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-use of
recycled materials helps prevent environmental pollution
and reduces the demand for raw materials.
NOTE
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf. You can
check the location of your nearest authorised repair agent
by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at
www.2helpU.com.
GUARANTEE
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement
is in addition to and in no way prejudices your statutory
rights. The guarantee is valid within the territories of the
Member States of the European Union and the European
Free Trade Area.
If a Black & Decker product becomes defective due to faulty
materials, workmanship or lack of conformity, within 48
months from the date of purchase, Black & Decker
guarantees to replace defective parts, repair products
subjected to fair wear and tear or replace such products to
ensure minimum inconvenience to the customer unless:
