4
c. Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool.
Power
tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations
different from those intended could result in a hazardous
situation.
5. Battery tool use and care
a. Ensure the switch is in the off position before
inserting battery pack.
Inserting the battery pack into
power tools that have the switch on invites accidents.
b. Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
c. Use power tools only with specifically designated
battery packs.
Use of any other battery packs may
create a risk of injury and fire.
d. When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
e. Under abusive conditions, liquid may be ejected
from the battery; avoid contact.
If contact
accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
6. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is
maintained.
ADDITIONAL SAFETY INSTRUCTIONS FOR
AUSTRALIA AND NEW ZEALAND
a.
Young children and the infirm.This appliance is not
intended for use by young children or infirm persons
without supervision. Young children should be
supervised to ensure they do not play with this
appliance.
b.
Replacement of the supply cord. If the supply cord is
damaged, it must be replaced by the manufacturer or
an authorised Black & Decker Service Centre in order to
avoid a hazard.
ADDITIONAL POWER TOOL SAFETY WARN-
INGS
Warning!
Additional safety warnings for drills and
impact drills.
•
Wear ear protectors with impact drills. Exposure to
noise can cause hearing loss.
•
Use auxiliary handles supplied with the tool. Loss of
control can cause personal injury.
•
Hold power tool by insulated gripping surfaces when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord.
•
Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and shock
the operator.
ADDITIONAL SAFETY INSTRUCTIONS FOR
BATTERIES AND CHARGERS
Batteries
•
Never attempt to open for any reason.
•
Do not expose the battery to water.
•
Do not expose the battery to heat.
•
Do not store in locations where the temperature may
exceed 40°C.
•
Charge only at ambient temperatures between 4°C and
40°C.
•
Charge only using the charger provided with the tool.
•
When disposing of batteries, follow the instructions
given in the section “Protecting the environment”.
•
Do not damage/deform the battery pack either by
puncture or impact, as this may create a risk of injury
or fire.
•
Do not charge damaged batteries.
Chargers
Your charger has been designed for a specific voltage.
Always check that the mains voltage corresponds to the
voltage on the rating plate.
•
Use your Black & Decker charger only to charge the
battery in the tool with which it was supplied. Other
batteries could burst, causing personal injury and
damage.
•
Never attempt to charge non-rechargeable batteries.
•
If the supply cord is damaged, it must be replaced by
the manufacturer or an authorised Black & Decker
Service Centre in order to avoid a hazard.
