08 PROGRAM DIGITAL DISPLAY –
TIERED RATE BILLING
Enter Billing Rate for Tier 1.
To make the numbers change
faster, you can press and hold
the
or
.
Enter Threshold 1.
Enter Billing Rate for Tier 2.
Enter Threshold 2.
If there is a Tier 3,
enter Billing Rate for Tier 3.
S T E P
A C T I O N / P R E S S
D I S P L AY
Note:
Before you begin programming your Digital Display for Tiered Rate Billing,
you will need to refer to the Billing Rates and Thresholds you recorded in section 05.
C o n t i nue on the top of the next page.
31
30
08 PROGRAM DIGITAL DISPLAY –
TIERED RATE BILLING
If there is no Tier 3,
Press
until you see dashes.
If you have additional tiers and
thresholds, continue to enter
Billing Rates for each tier and
enter each threshold.
Programming is complete!
S T E P
A C T I O N / P R E S S
D I S P L AY
Note:
Before you begin programming your Digital Display for Tiered Rate Billing,
you will need to refer to the Billing Rates and Thresholds you recorded in section 05.
Go to Section 10, Using Yo u r
Power Monito r.
90539499 01 EM100B.qxd 7/7/08 10:05 AM Page 30
