ENGLISH
Power
tools are dangerous in the hands of untrained users.
Many accidents are caused by poorly
maintained power tools.
Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
A charger that is suitable for one type of
another battery pack.
Use of any other battery packs may create
Shorting the battery terminals together may cause burns
Liquid ejected from the
battery may cause irritation or burns.
This will
ensure that the safety of the power tool is maintained.
@
Additional safety warnings for drills and
impact drills
Exposure to
noise can cause hearing loss.
Loss of
control can cause personal injury.
Cutting accessory contacting
a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Fasteners contacting a "live" wire
may make exposed metal parts of the power tool "live"
and could give the operator an electric shock
Holding the
work by hand or against your body leaves it unstable and
may lead to loss of control.
location of wiring and pipes.
Avoid touching the tip of a drill bit just after drilling, as it
may be hot.
This tool is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety. Children should be supervised to ensure
that they do not play with the appliance.
The intended use is described in this instruction manual.
The use of any accessory or attachment or performance
of any operation with this tool other than those
recommended in this instruction manual may present a
risk of personal injury and/or damage to property.
b. Power to the tool should always be supplied via residual
current device with a rated residual current of 30mA or
less.
