9
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always using identical replacement
parts.
TROUBLESHOOTING
Problem
Possible Cause
Possible Solution
• Unit will not start.
• Battery pack not installed properly.
• Check battery pack
installation.
• Battery pack not charged.
• Check battery pack charging
requirements.
• Battery pack will not charge. • Battery pack not inserted into charger. • Insert battery pack into
charger until red LED
appears.
• Charger not plugged in.
• Plug charger into a working
outlet. Refer to “Important
Charging Notes” for more
details.
• Check current at
receptacle by plugging in a
lamp or other appliance.
• Check to see if
receptacle is connected to
a light switch which turns
power off when
you turn out the lights.
• Surrounding air temperature
• Move charger and battery
too hot or too cold.
pack to a surrounding air
temperature of above 40
degrees F (4,5°C) or below
105 degrees F (+40,5°C).
For assistance with your product, visit our website
www.blackanddecker.com
for the location of the
service center nearest you or call the BLACK & DECKER help line at
1-800-654-155.
Accessories
Recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
1-800-654-144.
WARNING:
The use of any accessory not recommended for use with this tool could
be hazardous.
90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 9
