ENGLISH
(Original instructions)
11
Note!
When the unit is in Automatic mode,
temperature levels cannot be manually controlled or
changed.
Note!
When first turned on, the unit will automatically
start on Automatic mode.
♦
Cooling Mode - In cooling mode, the unit will blow
out cold air to decrease the ambient temperature.
To select cooling mode, press the ‘Mode’ button
repeatedly until the corresponding indicator lights
up.
♦
Fan Mode - In fan mode, the unit will blow out
natural air to cool the ambient temperature.
To select fan mode, press the ‘Mode’ button
repeatedly until the corresponding indicator lights
up.
Note! When the unit is in Fan mode, temperature
levels cannot be manually controlled or changed.
♦
Dehumidifying Mode - This unit is equipped with a
dehumidifying function, which removes moisture
from the air to purify it.
To select dehumidifying mode, press the ‘Mode’
button repeatedly until the corresponding indicator
lights up.
Note!
When the dehumidifying function is selected,
the unit will vibrate briefly as the compressor kicks
in. This is normal and not indicative of malfunction.
♦
Sleep Mode - You can set the unit to operate
overnight by pressing the Sleep button when the
unit is in operation.
In sleep mode, the unit will operate at low speed,
and its temperature will increase or decrease by
1 degree for the first two hours. The unit will then
keep a constant temperature until turned off.
In cooling mode, the temperature will increase; in
fan mode, it will decrease.
Press the Sleep button again while the unit is in
sleep mode to turn this function off. The fan will
resume operation and default to the latest pre-set
mode and speed settings.
Note!
In sleep mode, the unit will automatically turn
itself off after 12 hours of continuous operation.
The Timer Function
This unit is equipped with a 24-hour programmable
timer.
Setting the Timer
♦
Press the Timer button on the remote control or
on the appliance’s control panel to activate the
timer. The number ‘0’ will appear on the unit’s LCD
display to indicate the timer function has been
selected.
♦
Once this function has been activated,
continuously press the Timer button again to
select your desired operation time, from 1 to 24
hours.
Pre-Setting the Timer
♦
The unit’s timer can also be pre-set and used as
a delay timer, so that the unit will begin operation
after a set period of time.
♦
To pre-set a delay time, press the Timer button
while the unit is plugged into the mains, but not in
operation. The number ‘0’ will appear on the unit’s
LCD display to indicate the pre-set delay timer
function has been selected.
♦
Once this function has been activated,
continuously press the Timer button again to
select your desired delay time, from 1 to 24 hours.
Note! To cancel a pre-set delay timer, press the
Power On/Off button to turn the unit on, then press
the button again to turn it off if necessary. This will
cancel any previously set delay timers.
Draining the Unit
