Black & Decker BPGS8100, Original Instructions Manual

Page: 8 / 36

8
ENGLISH
Safety Warnings Speci fi c for Grinding
Operations
a. Use only wheel types that are
recommended for your power tool and the
speci
fi c guard designed for the selected
wheel. Wheels for which the power tool was
not designed cannot be adequately guarded
and are unsafe.
b. The guard must be securely attached to the
power tool and positioned for maximum
safety, so the least amount of wheel is
exposed towards the operator.
The guard
helps to protect operator from broken wheel
fragments and accidental contact with wheel
and sparks that could ignite clothing.
c. Wheels must be used only for
recommended applications. For example:
do not grind with the side of cut-off wheel.
Abrasive cut-off wheels are intended for
peripheral grinding, side forces applied to
these wheels may cause them to shatter.
d. Always use undamaged wheel fl anges
that are of correct size and shape for your
selected wheel.
Proper wheel fl anges support
the wheel thus reducing the possibility of wheel
breakage. Flanges for cut-off wheels may be
different from grinding wheel fl anges.
e. Do not use worn down wheels from larger
power tools. Wheel intended for larger power
tool is not suitable for the higher speed of
a smaller tool and may burst.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of personal injury due
fl ying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
– Risk of dust from hazardous substances.
Tool Symbols
The following symbols are printed on the tool:
Read the instruction manual before use.
Please wear hearing protectors.
Please wear eye protection equipment.
Position of date barcode ( fi g. 1)
The date barcode (n), including the year of
manufacturing, is printed on the tool housing.
E.g.:
2013 XX JN
Year of manufacturing
Package Content
This product package includes:
1 Angle
grinder
1 Guard
1 Flange
set
1 Spanner
1 Handle
1 Instruction
manual
• Check the tool, parts, and accessories to see if
they are damaged during transportation.
• Take a few moments to read and understand
this manual before using the tool.
Description (Fig. 1)
Warning! Never modify the power tool
or any part of the tool, otherwise it may
cause damage to the tool or result in
personal injury.
a. ON/OFF switch
b. Spindle lock
c. Guard
Purpose of design
This angle grinder is designed especially for
grinding.
Do not use sandpaper discs and grinding wheels
other than those with depressed center.
Do not use the tool in wet conditions or
environments in the presence of fl ammable liquids
or gases.
This heavy-duty angle grinder is a professional
power tool.
Do not allow children to come in contact with this
tool. Inexperienced operators are required to use
this tool under supervision.
Electrical Equipment Safety
Only one voltage is applicable to this tool. Be sure
to check that the power suuply corresponds to the
voltage on the rating plate.