Black & Decker BHSM1610DSM, Original Instructions Manual

Page: 11 / 42

11
ENGLISH (Original instructions)
The Delta Head (Fig. D)
This steam mop incorporates a built-in delta head which
enables you to access tight corners and narrow spaces.
Caution! Always wear suitable shoes when accessing the
delta head on your steam mop. Do not wear slippers or
open-toed footwear.
u
Turn the steam-mop to ‘OFF’
u
Wait until the steam-mop cools down (approximately five
minutes).
u
Place the front of your shoe onto the steam head removal
tab (12c) and press down gently.
u
Lift the delta head (12b) up off the steam head (12a)
u
Fit the delta head cleaning pad to the bottom of the delta
head.
Note: Remove the cleaning pad before refitting the delta
head to the steam head.
u
To refit the Delta head, place the yip of the Delta head into
the steam head then press down firmly ensuring that the
Delta head clicks into place.
Attaching the hose and accessories to the
hand held steam cleaner (Fig. G - M)
Warning! Inspect the seal between the connection point on
the hand held steam cleaner (5) and the steam hose (16)
before each use. If the seal malfunctions or is damaged,
please contact your nearest authorised repair agent. Do not
use the appliance.
Attaching the hose
u
Press the steam hose release button (16a) on the steam
hose (16).
u
Connect the steam hose (16) to the hand held steam
cleaner (5) and release the steam hose release button
(16a) making sure it clicks into place.
Important! Ensure that the steam hose (16) is securely
connected to the hand held steam cleaner (5). If steam
escapes from the joint, the hose is incorrectly fitted. Switch off,
allow the unit to cool then remove and refit the hose.
Attaching accessories (Fig H)
u
Align the lugs on the steam nozzle (17) with the recesses
on the accessory.
u
Press the accessory onto the steam nozzle (17) and twist
anti-clockwise until the accessory clicks into place.
Important! All accessories, apart from the SteaMitt
TM
(24)
which has its own hose and connector (25), must be attached
to the steam hose (16) for use.
Removing the hose and accessories
Warning! The steam hose (16), Steam nozzle (17) and
accessories become hot during use. Allow the unit and all
accessories to cool before attempting to remove.
Removing an accessory
u
Twist the accessory clockwise then pull away from the
hose (16).
Removing the hose
u
Press the steam hose release button (16a) on the steam
hose (16) and pull away from the hand held steam unit.
SteaMitt
TM
Your BLACK+DECKER
TM
SteaMitt
TM
has been designed for
sanitising and cleaning tiles, work tops, kitchen surfaces and
bathroom surfaces. This appliance is intended for indoor
household use only.
Attaching the SteaMitt
TM
hose to the hand held
steam unit
Warning! Inspect the seal on the steam nozzle and hose
before each use. If the seal is missing or damaged then
please contact your nearest authorised repair agent.
Do not use the appliance. Inspect the seal on the SteaMitt
TM
and hose If the seal is missing, damaged or any steam
is escaping then please contact your nearest authorised
repair agent. Do not use the appliance. Ensure there is no
blockage or impedence in the SteaMitt
TM
hose or attachment
hose. If any are detected then please contact your nearest
authorised repair agent. Do not use the appliance .
Fitting a cleaning pad to the
SteaMitt
TM (Fig. J)
Warning! Ensure there is no blockage or impedence in
the steam release vents If any are detected then please
contact your nearest authorised repair agent. Do not use the
appliance.
u
Fit the cleaning pad (26) to the SteaMitt
TM
(24) by
attaching the 'loop' velcro strips (26a) on the upper side
of the cleaning pad, to the 'hook' velcro pads (24a) on the
underside of the SteaMitt
TM
(24). Press down firmly.
Warning! The SteaMitt
TM
should not be used without fitting a
cleaning pad.
Note: The SteaMitt
TM
accommodates 4 types of cleaning pads
of varying thickness. Scouring pad (for use on tough stains
and non delicate surfaces), Bathroom pad (for use on taps
and other moulded bathroom surfaces), Standard pad (for use
on all larger surfaces) and Polishing pad (for use on delicate
surfaces).
@
Warning! Always use the SteaMitt
TM
as shown in
figure M, with your hand inside the protective glove.
@
Warning! Never attempt to use the SteaMitt
TM
by
gripping it externally as shown in figure N.
This will result in scalding.
@
Warning! Avoid using the SteaMitt
TM
in tight corners
as shown in figure O.