Page 9
ENGLISH
Page 9
SET UP & USE
The FAN may be operated by the
manual controls located on the
FAN (as shown in FIGURE 1) or
by your remote control (shown
in FIGURE 2). Place the FAN on a
stable flat surface. Plug the cord
set into a 120V A.C. electrical
outlet.
1.
POWER
: Turn the FAN
on by pressing the ‘POWER’
button; Turn the FAN off by
pressing the ‘POWER’ button
again.
2.
SPEED
: You can adjust
the fan speed to the desired
level: low, medium, or high by
pressing ‘SPEED’ continuously.
3.
MODE
: Pressing the’
MODE’ button will set the FAN
into NORMAL, NATURAL, and
SLEEP mode.
4. TIMER
: The fan is equipped
with a timer that allows you to
set its length
of operation
5.
OSC
: Pressing the ‘OSC’
button will start and stop the
oscillation function.
CONTROL PANEL
FIGURE 1
REMOTE CONTROL
FIGURE 2
OPERATION INSTRUCTIONS
CONTROL PANEL
POWER
SPEED
OSC
TIMER
MODE
POWER
SPEED
OSC
TIMER
MODE