![Black & Decker BES720 Original Instructions Manual Download Page 14](http://html.mh-extra.com/html/black-and-decker/bes720/bes720_original-instructions-manual_35224014.webp)
14
ENGLISH
(Original instructions)
u
The offcut piece remains on the saw table (1).
u
Secure long workpiece against falling off at the end of the
cut ) with a roller stand etc.
Warning!
Always use the push stick (19) when ripping small
workpieces.
Do not cut excessively small workpieces.
Cross Cutting
u
Lock the miter gauge (6) at 0 degree.
u
Set the bevel angle to 0 degree.
u
Adjust the saw blade (4) height.
u
Hold the workpiece flat on the table (1) and against the
fence. Keep the workpiece away from the blade.
u
Keep both hands away from the path of the saw blade.
u
Switch the machine on and allow the saw blade to reach
full speed.
u
Hold the workpiece tightly against the fence and slowly
move the workpiece together with the fence assembly until
the workpiece comes underneath the upper blade guard.
u
Allow the teeth to cut, and do not force the workpiece
through the saw blade. The saw blade speed should be
kept constant.
After completing the cut, switch the machine off, allow the saw
blade to stop and remove the workpiece.
Warning!
Never push or hold the cut-off-side of the work-
piece.
Blade jamming handling
u
Ensure the machine is disconnected from the power
source.
u
Remove the workpiece. Be careful of your hands not
touching the saw blade.
u
Press the overloaded protector (21) and connect the plug
again, the machine can resume working.
After use
u
After use, wipe off chips and dust adhering to the tool with
a cloth or the like.
u
Lubricate the sliding portions with machine oil to prevent
rust.
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
BES720 Type 1
Voltage
V
230
Frequency
Hz
50
Power input
W
1800
No-load speed
/min
5200
Blade diameter
mm
254
Blade body thickness
mm
2.0
Allowed range of kerf width
mm
2.8
Bore size
mm
30
Riving knife thickness
mm
2.5
Max. cutting depth at 45º
mm
58
Max. cutting depth at 90º
mm
80
Blade bevel range
0 - 45º
weight
kg
27.56
Level of sound pressure according to EN 62841:
L
pA
(sound pressure) 95 dB(A), Uncertainty (K) 3
dB(A)
L
WA
(sound power) 108 dB(A), Uncertainty (K) 3 dB(A)
Declaration of Conformity
The Supply of Machinery (Safety) Regulations 2008
BES720 Table Saw
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN62841-1:2015, EN62841-3-9:2015+A11:2017,
These products also comply with with the following
regulations;
The Supply of Machinery (Safety) Regulations 2008, S.I.
2008/1597 (as amended)
Electromagnetic Compatibility Regulations 2016, S.I.
20161091 (as amended)
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended)
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.