5
2-Pack Grounded Indoor Outlet Timers
In the event of malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. The timer must be connected to a cord
having an equipment-grounding conductor and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
Improper connection of the equipment grounding conductor can result in a risk
of electric shock. The conductor with insulation having an outer surface that is green with or
without yellow stripes is the equipment grounding conductor. If repair or replacement of the
cord or plug is necessary, do not connect the equipment-grounding conductor to a live
terminal. Check with a qualified electrician or service person if the grounding instructions are
not completely understood, or if in doubt as to whether the timer is properly grounded. Do not
modify the plug connected to the timer – if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
FOR GROUNDED, CORD-CONNECTED TIMER RATED LESS THAN 15A AND INTENDED
FOR USE ON A NOMINAL 125V SUPPLY CIRCUIT
The timer is for use on a nominal 125V circuit, and should be connected to a grounding
outlet that looks like that illustrated in sketch a. A temporary adaptor, which looks like the
adaptor illustrated in sketch b, may be used to connect this plug to a 2-pole receptacle as
shown in sketch b if a properly grounded outlet is not available. The temporary adaptor
should be used only until a properly grounded outlet can be installed by a qualified electri-
cian. The green colored rigid ear, lug, and the like, extending from the adaptor must be
connected to a permanent ground such as a properly grounded outlet box cover. Whenever
the adaptor is used, it must be held in place by the metal screw.
Grounding Instructions
DANGER
:
NOTE:
IN CANADA, THE USE OF A TEMPORARY ADAPTOR IS NOT PERMITTED BY
THE CANADIAN ELECTRICAL CODE. Ensure that the timer is connected to an outlet
having the same configuration as the plug.
