background image

7

ENGLISH

(Original instructions)

Check for misalignment and seizure 

of moving parts, breakage of parts, 

damage to guards and switches 

and any other conditions that may 

affect its operation. Ensure that the 

appliance will operate properly and 

perform its intended function. Never 

use the appliance when any guard or 

enclosure is damaged or not in place. 

Do not use the appliance if any part is 

damaged or defective. Do not use the 

appliance if the switch does not turn it 

on and off.

  Have any damaged or defective parts 

repaired or replaced by an authorised 

repair agent.

u

 

Check the cable frequently for 

damage. If the cable is damaged, it 

must be replaced by an authorised 

repair agent in order to prevent a 

hazard. Inspect extension cables 

periodically. Replace a damaged 

extension cable immediately.

u

 

Keep all nuts, bolts and screws on 

the appliance tight to ensure a safe 

working condition.

u

 

Check the grass collector for wear or 

damage and replace it if necessary. 

Never use the appliance without the 

grass collector.

u

 

Be careful during adjustment of the 

machine to prevent entrapment of the 

fingers between moving blades and

  fixed parts of the machine.

u

 

When servicing the blades be aware 

that, even though the power source is 

switched off, the blades can still be

 moved.

u

 

When not in use, the appliance should 

be stored in a dry  place. Children 

should not have access to stored 

appliances.

u

 

Always allow the machine to cool 

down before storing.

u

 

Ensure that only replacement cutting 

means of the right type are used.

u

 

Use only BLACK+DECKER 

recommended spare parts and 

accessories.

Additional safety instructions for 

Lawnmowers

Always use an approved extension 

cable suitable for the power input of 

this tool (see technical data). The 

extensioncable must be suitable for 

outdoor use and marked accordingly. 

Up to 30 m of 1.5 mm2 HO5VV-F 

extension cable can be used without 

loss of product performance.  

Before use, inspect the extension 

cable for signs of damage, wear and 

ageing. Replace the extension cable 

if damaged or defective. When using 

a cable reel, always unwind the cable 

completely.

Do not transport the machine while the 

power source is running

u

 

Firmly grip handle with both hands 

when operating the lawn mower.

u

 

If at any time it is felt necessary to tilt 

the lawn mower, make sure that both 

hands remain in the operating position 

while the lawn mower is tilted.  

Summary of Contents for BDMOW1200

















Reviews: