background image

6

ENGLISH

(Original instructions)

Do not use the appliance in damp or 

wet conditions. Preferably do not use 

the appliance in wet grass.

u

 

Be sure of your footing, particularly on 

slopes. Be aware that freshly cut grass 

is damp and slippery. Do not work on

  steep slopes.

u

 

Work across the face of slopes, never 

up and down. Take extreme caution 

when changing direction on slopes.

u

 

Do not mow excessively steep slopes.

u

 

Walk, never run when using the 

appliance. Do not pull the appliance 

towards you or walk backwards when 

using the appliance.

u

 

Switch on the appliance according to 

instructions and with your feet well 

away from the blade.

u

 

Do not start the machine when 

standing in front of the discharge 

opening.

u

 

Do not tilt appliance when switching it 

on, except if the appliance has to be 

tilted for starting.  

In that case, do not tilt the appliance 

more than absolutely necessary and 

lift only the part that is away from the 

operator. Always ensure that both 

hands are in the operating position 

before returning the appliance to the 

ground.

u

 

Switch off the appliance and wait for 

the blade assembly to stop running 

if the appliance has to be tilted 

for transportation when crossing 

surfaces other than grass, and when 

transporting the appliance to and from 

the area to be mowed.

u

 

Do not lift or carry the appliance until 

the blade has come to a complete 

standstill.

u

 

Keep your hands and feet well away 

from the blade. 

u

 

Do not put your hands or feet near or 

under rotating parts.

u

 

Keep away from discharge openings at 

all times.

u

 

Switch off, remove the plug from 

the socket and ensure that moving 

parts have stopped rotating before 

leaving the appliance unattended 

and before changing, cleaning or 

inspecting any parts of the appliance 

or clearing a blockage. After striking 

a foreign object. Inspect the machine 

for damage and make repairs before 

restarting and operating the machine;

u

 

If the appliance starts to vibrate 

abnormally or if you hit a foreign 

object, switch the appliance off and 

remove the plug from the socket. 

Check for any damage to the 

appliance, replace or repair any 

damaged parts, check for and tighten 

any loose parts.

u

 

Take care to keep the mains cable 

away from the blade. Always be aware 

of the position of the cable.

u

 

The motor will continue to run for a few 

seconds after switching the appliance 

off. Never attempt to force the blade to 

come to a standstill.

Maintenance and storage

u

 

Before use, check the appliance for 

damaged or defective parts.  

Summary of Contents for BDMOW1200

















Reviews: