Page 9
SET UP & USE
12. Place the unit back in an upright position. Replace the top hinge
cover.
NOTE:
If the top of the door is not aligned with the cabinet, loosen the top
hinge screws, adjust door and re-tighten the screws.
Top hinge and
hinge cover
Top hinge and
hinge cover
Door Pin
Door Pin
Lower hinge bracket
Lower hinge bracket
Turn over
Cabinet hole plug
Cabinet hole plug
Door hole
plug
Door hole
plug
REVERSING THE DOOR HINGE
(MODEL BD61536)
1. Remove the top hinge cover.
2. Using a Phillips Head Screwdriver, loosen and remove the 2 screws
holding the top hinge in place.
3. Remove top hinge and carefully lift off the door.
4. Remove the screw hole plugs from the opposite side and insert the
plugs in the screw hole openings of the just removed screws.
5. Remove any loose items in the wine cellar and carefully place the
wine cellar on its back.
6. Loosen the screws holding the lower hinge bracket to the wine cellar
and remove screws and bracket.
Summary of Contents for BD61516
Page 19: ......
