Black & Decker BD06WT6, Instruction Manual

Page: 19 / 76

Page 19
ENGLISH
SET UP & USE
TO OPERATE ON AUTO FEATURE:
• When you set the air conditioner in
AUTO mode, it will automatically
select cooling, heating (cooling only
models without), or fan only operation
depending on what temperature you
have selected and the room tempera-
ture.
• The air conditioner will control room
temperature automatically round the
temperature point set by you.
• In this mode, the fan speed cannot be
adjusted, it starts automatically at a
speed according to the room tem-
perature.
TO OPERATE ON FAN ONLY:
• Use this function only when cool-
ing is not desired, such as for room
air circulation or to exhaust stale air.
(Remember to open the vent dur-
ing this function, but keep it closed
during cooling for maximum cooling
efficiency.) You can choose any fan
speed you prefer.
• During this function, the display will
show the actual room temperature,
not the set temperature as in the
cooling mode.
• In Fan only mode, the temperature is
not adjusted.
TO OPERATE ON DRY MODE:
In this mode, the air conditioner will
generally operate in the form of a dehu-
midifier. Since the conditioned space is
a closed or sealed area; some degree of
cooling will continue. On Dry mode, the
fan speed is controlled at Low auto-
matically.
TIMER: AUTO START/STOP FEATURE:
• Press Timer button, the TIMER ON or
TIMER OFF indicator light illuminates.
It indicates the Auto Start or Auto
Stop program is initiated. For some
units, keep pressing the Timer button
will cancel the timer settings.
• Press or hold the UP or DOWN button
to change the Auto time by 0.5-hour
increments, up to 10 hours, then at
1 hour increments up to 24 hours.
The control will count down the time
remaining until start.
• The selected time will register in 5
seconds, and the system will au-
tomatically revert back to display
the previous temperature setting or
room temperature when the unit is
on (when the unit is off, there is no
display.)
• Turning the unit ON or OFF at any
time or adjusting the timer setting to
0.0 will cancel the Auto Start/Stop
timed program.
DISPLAYS: Shows the set temperature
in “OC” or “OF” and the Auto-timer set-
tings. While on Fan only mode, it shows
the room temperature. If the room
temperature is too high or low, it will
display “ HI” or “ LO”
ERROR CODES:
AS - Room temperature sensor error
ES - Evaporator temperature sensor
error or •
HS -Electric heating sensor error (on
some models);
CS -Condenser temperature sensor er-
ror (on some models);
OS -Outside temperature sensor
error(on some models);
E7 -Unit malfunction(on some models).
NOTE:
When error occurs, unplug the
unit and plug it back in. If error repeats,
call for service.
NOTE: If the unit breaks off unexpect-
edly due to the power failure, it will re-
start with the previous function setting
automatically when the power resumes.
ADDITIONAL THINGS YOU
SHOULD KNOW
Now that you have mastered the oper-
ating procedure, here are more features
in your control that you should become
familiar with:
• The Cool circuit has an automatic 3
minutes time delayed start if the unit is
turned off and on quickly. This prevents
overheating of the compressor and
possible circuit breaker tripping. The
fan will continue to run during this
time.
• The control is capable of displaying
temperature in degrees Fahrenheit or
degrees Celsius. To convert from one
to the other, press and hold the Up and
Down buttons at the same time for 3
seconds.