Page 4
Page 4
SET UP & USE
ASSEMBLY INSTRUCTIONS
We suggest you assemble the unit on a soft surface to avoid damage to the finish.
1. Place the Cooler Body (B) upside down, so the bottom is facing up.
2. Attach the Leg Assemblies (C) by lining up the holes in the leg assemblies (C)
and securing with M5x12 Bolts (I), (4) four should be used for each of the Leg
Assemblies (C).
3. Next attach the Bottom Tray (D) to the Leg Assemblies (C) by lining up the thru
holes in the Bottom Tray (D) with the threaded holes in the Leg Assemblies
4. Thread the (2) two Caster Wheels with Locks (E) into the threaded holes on the
left side of the Leg and Tray Assembly. Make sure both of the Casters have locks
on them. Secure them using an adjustable wrench. Do not over tighten as the
threads may strip.
5. Repeat Step 4 with the remaining Caster Wheels (F) for the right side of the Leg
and Tray Assembly.
6. Carefully turn the Cooler Cart onto its wheels. Lock the Casters by pressing down
on the lock pedal until it clicks into the locked position.
7. Attach the Bottle Cap Collector (G) by slipping the tabs into the slots on the
Cooler Body and then push down, it will click into position.
8. Secure the Bottle Opener (H) using (2) Two M5 x 12 Bolts (I). Do not over tighten
as the threads may strip.
9. Attach the Pull Handle (L) using (12) Twelve M4x16 Bolts (J). Do not over tighten
as the threads may strip.
10. Attach the first Lid Handle (K) to the Cooler Lid using M4 x 16 bolts. Repeat for
remaining Lid Handle. Do not over tighten as the threads may strip.
11. Place the assembled lid into position on the Cooler Body and press down to seal
the Cooler. There should be a snug fit.
12. When using the Cooler Cart remember to have the Drain Extension Tube
tightened onto the drain spout then tighten the Drain Cap onto the threaded
end of the Drain Extension Tube to keep water run off from the melting ice from
leaking out. When finished using the Cooler Cart remove the Drain Cap from the
Drain Extension Tube so the water from the melted ice can easily drain.
Summary of Contents for BCC20W
Page 7: ...Page 7 Page 7 ...
