Black & Decker AUTO01, Instruction Manual

Page: 6 / 32

6
english (original instructions)
7
english (original instructions)
handle, and the other gripping the bottom around the
battery area. Use auxiliary handle if provided. Loss of
control can cause personal injury.
Warning: some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to the state of
california to cause cancer, birth defects or other
reproductive harm. some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
• avoid prolonged contact with dust from power
sanding, sawing, grinding, drilling, and other
construction activities. Wear protective clothing
and wash exposed areas with soap and water.
Allowing dust to get into your mouth, eyes, or lay
on the skin may promote absorption of harmful
chemicals.
functional descriPtion
1. Variable speed switch
2. Forward/reverse button
3. Mode select buttons
4. Single sleeve keyless chuck
5. Battery
6. Battery release button
7. State of charger indicator
8. Screwdriver bit holder
9. LED work light
imPortant safety instructions
for battery chargers
save these instructions: This manual contains
important safety instructions for battery chargers.
• Before using charger, read all instructions and
cautionary markings on charger, battery pack, and
product using battery pack.
symbols
The label on your tool may include the following
symbols. The symbols and their definitions are as
follows:
V .......................volts
A .......................amperes
Hz.....................hertz
W......................watts
min ...................minutes
or AC ..........alternating current
or DC ......direct current
no .....................no load speed
....................Class I Construction (grounded)
.....................earthing terminal
...................safety alert symbol
.....................Class II Construction
(double insulated)
.../min or rpm...revolutions or
reciprocation per minute
.............. Read instruction manual
before use
................... Use proper respiratory protection
....................Use proper eye protection
................... Use proper hearing protection
Warning: shock hazard. Do not allow any liquid
to get inside charger.
caution: burn hazard. To reduce the risk of
injury, charge only designated black + decker
batteries. Other types of batteries may burst causing
personal injury and damage.
caution: Under certain conditions, with the charger
plugged in to the power supply, the charger can be shorted
by foreign material. Foreign materials of a conductive
nature such as, but not limited to, steel wool, aluminum foil,
or any buildup of metallic particles should be kept away
from charger cavities. Always unplug the charger from the
power supply when there is no battery pack in the cavity.
Unplug charger before attempting to clean.
Warning: do not attempt to charge the battery
pack with any chargers other than the ones in this
manual. The charger and battery pack are specifically
designed to work together.
• these chargers are not intended for any uses
other than charging designated black + decker
rechargeable batteries. Any other uses may result in
risk of fire, electric shock or electrocution.
• do not expose charger to rain or snow.
• Pull by plug rather than cord when disconnecting
charger. This will reduce risk of damage to electric
plug and cord.
• make sure that cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress.
• do not use an extension cord unless it is