background image

3

SAVE THESE INSTRUCTIONS

THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR THE 200 WATT POWER
INVERTER MODEL PI200AB.

WARNING: TO REDUCE THE RISK OF INJURY:

• Follow these instructions and those published by battery manfacturer and the manufacturer of any equipment
you intend to use with this unit. Review cautionary markings on these products and on engine.

INTRODUCTION

Thank you for purchasing the 

PI200AB 200 Watt Power Inverter with USB Charging Port.

This inverter can be

used to operate personal electronics such as: laptop computers, digital/video cameras, MP3 players, cell
phones, PDAs, and more. It can also be used to recharge 110/120 volt AC devices that have an appropriate
recharging adapter with a standard North American two- or three-prong plug. Please read this Instruction
Manual carefully before use to ensure optimum performance and to avoid damage to this product.

FEATURES

The front panel provides three LED indicators. The green LED indicates power and proper operation of the
inverter. The AC and USB outlets are ready to use. The red LED indicates inverter shutdown from an over-load
or over-temperature fault and the yellow LED indicates an input fault. (If the red or yellow Fault LED Indicator
lights, refer to the Troubleshooting Section of this Instruction Manual.)
The Power Pushbutton turns the inverter ON and OFF. It can also be used to force reset of inverter circuits by
pressing it OFF (no LEDs are lit), then back ON again.
AC power is supplied through a standard North American three-prong type outlet. The outlet can accommodate
either two- or three-pin AC plugs. Power may also be supplied through the 12 volt DC outlet.

Controls and Functions

OUTPUT FAULT LED

INDICATOR

POWER LED

INDICATOR

INPUT FAULT LED

INDICATOR

BATTERY CLIPS
(WITH CABLES)

(ON/OFF) POWER PUSHBUTTON

(BLACK) NEGATIVE

CABLE POST

HIGH-SPEED COOLING FAN

BACK OF UNIT

(RED) POSITIVE

CABLE POST

DC ACCESSORY

OUTLET PLUG

115 VOLT AC OUTLET

(WITH TETHERED

COVER)

USB CHARGING

PORT (WITH

TETHERED COVER)

12 VOLT DC

OUTLET

(WITH TETHERED

COVER)

PI200AB_ManualEN_060807.qxp  6/8/2007  4:48 PM  Page 3

Summary of Contents for 200 WATT










Reviews: