AL200 swinghandle manual
3
1
Introduction
1.1
General information
Warning:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take
adequate measures.
The specification is owned and copyrighted by BKT Elektronik Sp. z o.o. Information contained herein may be changed at owner’s discretion
without any notice. BKT Elektronik may not be held liable for any possible inaccuracies and discrepancies in this document.
1.2
Device characteristics
The AL200 is an electronic swinghandle for ICT cabinets. It allows opening of cabinet doors in a standard way and by electrical remote control. It
can operate with any access control system. The device has a handle position indication. Thanks to the installed cylinder, it is also possible to
open it with a key.
Basic features:
It allows the remote opening from any external access control systems.
Equipped with the optical sensor of the handle position.
Two multi-pin connectors providing control and status signals of the handle.
Three-color LED signalling the operation status of the swinghandle.
Emergency key override.
Available inserts for the master key system.
For use with indoor cabinets.
Installation in a standard 150x25mm cut out.
Can be installed in a single and multi-point locking system (requires additional elements - cam or cogwheel mechanism, which should
be ordered separately).
2
Technical specifications
Parameter
Value
Power supply voltage
Nominal 12V DC, allowed 10-24V DC, recommended power supply 12V DC ≥500mA
Quiescent current consumption
110 mA at 10 V
90 mA at 12 V
60 mA at 24 V
Maximal current consumption
when opening/closing (200ms)
300 mA at 10 V
250 mA at 12 V
150 mA at 24 V
Connectors
Type 53047-0810 8-pin connector, type 53047-0410 4-pin connector
Dimensions
177 x 37 x 51mm (H x W x D)
Weight
150g
Packaging dimensions
200 x 100 x 50 mm (W x D x H)
Packaging weight
200g
Operating conditions
Temperature: 0°C - 50°C, Humidity: 0% - 90% RH (without condensation)
Storage conditions
Temperature: -10°C - 60°C, Humidity: 0% - 95% RH (without condensation)
Enclosure material
Glass fibre reinforced polyamide PA6 GF30
Enclosure colour
Black, RAL 9005
Enclosure protection degree
IP30
Compliance with directives
2014/30/EU (EMC), 2011/65/EU (RoHS)
Compliance with standards
EN 61000-4-2:2009 Electrostatic discharge immunity test.
EN 61000-4-3:2007 Radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4:2012 Electrical fast transient/burst immunity test.
EN 61000-4-5:2014 Surge immunity test.
