Rotisserie Oven
Operation
7
Item #
Description
Function
1 Rotor
Switch
When the switch is placed in this position, the rotor motor is off.
When the switch is placed in this position, the rotor motor is on
and the rotor system turns.
2 Operator
Switch
When the switch is placed in the this position, power is
removed from the oven.
When the switch is placed in this position, power is supplied to
the oven.
When the switch is placed in this position, power is supplied to
the oven and lights inside the oven come on.
3 Controller
Function
Keys
Pressing a key activates it’s associated function and illuminates the light next
to it.
Starts the cook cycle of the program number selected. While in
the programming mode, the Cook button accesses Stage-2 cook
time and temperature settings.
Starts the hold cycle of the program number shown in the display
area. While in the programming mode, the Hold button accesses
the hold time and temperature settings.
Starts the oven pre-heating. While in the programming mode, the
Pre-heat button accesses Stage 1 cook time and temperature
settings.
Each press of the Xtra button adds five minutes to the
programmed cook time. Press this button up to eleven times for
an additional 55 minutes of cook time. The oven will be
maintained at the last program temperature.
Enters the ‘programming mode’ allowing the operator to create
presets for Programs 1-15.
A quick press of the Stop button ‘pauses’ the controller during a
Pre-heat or Cook/Hold cycle. Press and hold the Stop button to
end a Pre-heat or Cook/Hold cycle.