Electric Pressure Fryer
Maintenance
34
Troubleshooting
Refer to the table below for troubleshooting information.
Problem Cause
Possible
Solution
Pressure Loss or Not Releasing
Pressure
Dead Weight Valve Leaking
Clean the weight and orifice. If
problems persist, contact an
authorized BKI service agent for
corrective action.
Lid Gasket Leaking
Contact an authorized BKI
service agent for corrective
action.
Solenoid Valve Leaking or
Stuck
After a period of time, it is
possible that the valve seat
and/or plunger may stick or wear.
Activate the valve by starting a
cook cycle. You should hear a
solid metallic CLICK sound from
the solenoid valve. If you should
hear no sound (or a slow
BUZZING CLICK), contact an
authorized BKI service agent for
corrective action.
Safety Valve not seating
Contact an authorized BKI
service agent for corrective
action.
Shortening Heating Too Slowly
Low voltage or improper
voltage
Contact an authorized BKI
service agent for corrective
action.
Bad thermostat or loose
wires
Contact an authorized BKI
service agent for corrective
action.
Weak heating elements or
heating elements breaking
down
Contact an authorized BKI
service agent for corrective
action.
Coil on contactor is bad
Contact an authorized BKI
service agent for corrective
action.
Breading build-up on heating
elements
Clean heating elements. If
problems persist, contact an
authorized BKI service agent for
corrective action.
Filter System Not Working
Uncertain
Press the reset button on end of
pump and hi-limit reset button
under control panel. If problems
persist, contact an authorized
BKI service agent for corrective
action.
Connections not tight
Tighten the connections. If
problems persist, contact an
authorized BKI service agent for
corrective action.
