Convection Oven
Installation
19
Installation
Serious injury, equipment damage or death could result if attempting to install this
oven yourself. Ensure that an authorized BKI service agent install the oven.
Unpacking and Handling
It is the owners’ responsibility to file all freight claims with the delivering truck line. Inspect all cartons and crates for
damage as soon as they arrive. If damage to cartons or crates is found, or if a shortage is found, note this on the bill
of lading (all copies) prior to signing.
If damage is found when the equipment is opened, immediately call the delivering truck line and follow up the call
with a written report indicating concealed damage to your shipment. Ask for an immediate inspection of your
concealed damage item. Packaging material
MUST
be retained to show the inspector from the truck line.
Remove all packing from the interior and exterior of the oven.
Location and Clearance
The oven must be mounted on a level surface capable of supporting the fully loaded oven. Refer to Chart 1 for oven
weight.
Adequate clearance must be provided around the oven for safety, proper operation and ventilation. Refer to Chart 1
for required minimum clearances. Note that these are minimum clearances. If the oven is to be permanently
mounted near other immovable objects additional clearance must be provided for connection and service of the oven
on both sides.
All ventilation slots must be kept free from obstruction.
Extraction
Extraction is not a specific requirement for this type of appliance. Certain conditions, e.g./ installation in a confined
space, temperature controlled environment, continuous use or high volume production cooking may require the need
for extra ventilation or extraction. Consult your local ventilation/extraction air conditioning company.
Wiring
Electrocution, equipment failure or property damage could result if an unlicensed
electrician performs the electrical installation. Ensure that a licensed electrician
perform the electrical installation.
Failure to restrain the oven when permanently connected could allow it to
move, possibly resulting in electrical shock.
Attach an ANSI Z21.69A compliant restraining
device (such as BKI part number FT0279)
according to the instructions provided by the
restraining device manufacturer in the location
shown at right.
Chart 1.
Location and Clearance
Summary of Contents for COq
Page 1: ...Convection Oven MODEL COq OPERATION AND MAINTENANCE Serial Numbers 139771 and higher ...
Page 7: ...Convection Oven Table of Contents 5 OPERATOR S SIDE Safety Decals N0166 N0202 ...
Page 46: ...Convection Oven Wiring Diagrams 44 Wiring Diagrams L1 L2 L3 G 10 10 9 9 3 2 1 L1 L2 L3 N G ...
Page 47: ...Convection Oven Wiring Diagrams 45 L1 L2 L3 N E 10 10 9 9 3 2 1 L1 L2 L3 N G ...