BKI BLF-F, Installation & Operation Manual

Page: 16 / 42

Electric Autolift Fryer Operation
13
Item # Description Function
1 Computer Used to program the cooking computer and activate the programs.
2 Capacitive Touch
Switch Basket Up/
Basket Down
BASKET UP
– Momentarily touching the button causes the lift
mechanism to rise. This is enabled only when the FILTER/OFF/FRY
switch is in the FRY position.
BASKET DOWN
– Momentarily touching the button causes the lift
mechanism to lower. This is enabled only when the FILTER/OFF/FRY
switch is in the FRY position.
3 Capacitive Touch
Switch Filter/Off/Fry
FILTER
– When touched, the LED light next to it will light up and
power is applied to the motor and shorting is pumped into the pot
directly or thru the fill hose.
OFF
– When touched, the LED light next to it will light up and power is
removed from the pump motor, heating elements and lift mechanism.
FRY
– When touched, the LED light next to it will light up and power is
supplied to the thermostat, heating elements and lift mechanism.
4 Digital Timer /
Thermostat
The digital timer / thermostat consists of 3 LEDs, display, beeper and
6 buttons described below:
LED indicators
P, C, H During the MLt & HEAt cycle the P LED will flash. When running a
timing cycle the C LED will flash. When idle and rdY the C LED is on.
H is not used
1, 2, 3, 4, 5 & 6
preset buttons These buttons are used to save and recall preset cycle times, saving
operator time and minimizing error when changing interval cycle time.
To recall any preset time, press and quickly release the appropriate
button and the time starts to count down.
Beeper A beeper sounds when the timer counts down to 0. Pressing any of
the number button stops the beeper and resets the timer to the
rdY
state.
Display Used to display the time & temperature. It also displays the words
“
MLt
” then “
HEAt
” until the frying temperature is reached and
rdY
when the fryer is ready to cook.
5 High Limit Reset
Switch
Located under the control panel. If the heating elements inside the pot
reach an unsafe temperature, power is automatically removed from
the control panel, lift mechanism and elements. Pressing this switch
returns power to the control panel, lift mechanism and elements.
6 Drain Lever DRAIN OPEN
– When placed in this position, the drain valve opens
and shortening in the pot drains into the vat. Also, power is removed
from the control panel, lift mechanism and elements.
DRAIN CLOSED
– When placed in this position, the drain valve is
closed to prevent shortening from draining into the pot.
7 Fill Lever FILL THRU POT
– When placed in this position, shortening can be
pumped automatically from the vat to the pot if the rocker switch is in
the FILTER position.
FILL THRU HOSE
– When placed in this position, shortening can be
pumped from the vat to the pot via a connected hose if the rocker
switch is in the FILTER position.
8 Rinse Hose
Connector
Used to connect the Rinse hose for cleaning and refilling the pot.