BKI 16/C Page 13 Operating Instructions Manual Download

Page: 13 / 15

NOTICE:

THE COMBINATION OF FACTS, DATA, DESIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING DATA & ASSEMBLY DATA

WHICH MAY BE CONTAINED IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BKI.

THESE MATERIALS ARE NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSION FROM BKI.

ALL RIGHTS ARE RESERVED.

Operating Overview.

Switch main power “ON”

Select

Cook

program

Press

Pre-heat

button

Buzzer sounds

when oven is up to temperature (Ready)

Press

Cancel Alarm

button (oven temperature is maintained)

Press

Stop

button – short press (oven heaters & fans off) oven in pause

Load product.

Press

Cook

button

Alarm sounds

(End of Cook)

Cancel alarm

(alarm button)

Check

product temperature

(Internal temperature must be 85

C minimum)

Xtra time required?

If yes press

Xtra

button (Each press adds an xtra 5 mins)

xtra time is displayed

Alarm sounds.

Cancel Alarm

(alarm button)

Check

product internal temperature

If OK

, press

Stop

button & unload

If NOT

, add

Xtra

time

Note:
A quick press of the Stop button puts the oven in pause mode; the function light (cook, hold) will
flash, Press the flashing function button again to restart.
Press & hold stop button until function lights go out to stop oven completely.

If Hold required?

Press

Hold

button.

At end of hold period the Alarm sounds, Cancel Alarm, Remove product.

Summary of Contents for 16/C
















Search results

Summary of Contents for 16/C

Reviews:

Related manuals for 16/C

Brands by name

Popular brands

BKI 16/C, Operating Instructions Manual

Search results

Summary of Contents for 16/C

Reviews:

Related manuals for 16/C

Brands by name

Popular brands