BK TECHNOLOGIES BKR9000 User Manual Download Page 57

Page: 57 / 71

BKR9000 Portable Radio User’s Manual

- 53 -

Keypad Programming

Radio programming is to be performed only by authorized personnel.

Any or all functions may be password protected to prevent unauthorized

access. Check with your communications officer for information on the

programmed functions of your radio.
NOTE: Trunking channels and systems cannot be programmed via the

radio keypad.
Keypad programmable categories include individual Channel, Zone

and Global radio parameters, individual P25 ID Quick Call/Receive List,

User Tone List, User NAC List and User Talk Group ID List.

Check with your BK Technologies dealer or communications officer for

information on the programmed functions of your radio.

Keypad Programming Navigation

While in programming mode the diamond, arrow up, arrow down and

square buttons are used navigate the programming functions. The

following table shows possible button functions:

Keypad Programming Buttons

ENT

Opens the highlighted function or enters the displayed information

ESC

Press once to go back to previous screen or hold to exit

programming mode and return to normal radio operation

NEXT

Move to the next item in a displayed list or the next character in a

displayed value

PREV

Move to the previous item in a displayed list

EDIT

Used to select and edit individual characters in a displayed value

BACK

Move to the previous character in a displayed value

CLR

Clears the displayed value

EDIT

Used to edit individual characters in a displayed value

INV

Inverts a displayed digital tone value (CDCSS)

Summary of Contents for BKR9000








































































Search results

Summary of Contents for BKR9000

Reviews:

Related manuals for BKR9000

Brands by name

Popular brands

BK TECHNOLOGIES BKR9000, User Manual

Search results

Summary of Contents for BKR9000

Reviews:

Related manuals for BKR9000

Brands by name

Popular brands