32 BK Radio
ANI ENCODING (Analog Mode Only)
ANI encoding (Automatic Numeric
Identification), if enabled, transmits a sequence
of DTMF tones each time you press the PTT
switch. You will hear a sidetone. Your dealer
can program the ANI number to be sent.
If DTMF and ANI are both enabled, the ANI
tone sequence is transmitted only after the
[ENT]
key is pressed while the PTT switch is
activated. You will hear a sidetone.
TIME-OUT-TIMER
The transmit Time-Out-Timer limits the
duration of calls and guards against accidentally
locking on the transmitter and tying up the radio
system. Your dealer can program the duration of
the Time-Out-Timer (15–225 seconds, or
disabled).
BUSY CHANNEL
If the radio has been programmed for Busy
Channel operation, it will operate in one of the
following three Modes:
• Busy Channel Indication
• Busy Channel Lockout
• Busy Channel Lockout Override
BUSY CHANNEL INDICATION
The yellow Busy Channel Indicator glows if
there is carrier activity on the selected
channel. If the selected channel is a Channel
Guard channel and the proper Channel Guard
value is not detected, the Busy Channel
Indicator remains on for the duration of the
carrier activity and no message is heard.
During Scan and Priority Scan operation, the
Busy Channel Indicator glows when activity is
detected on any channel on the Scan List.
1
2
3
4
5
6
7
8
9
0
*
#
CLR
FCN
PRI
ENT
DPH Owner’s Manual 13
G
ROUP
S
ELECTOR
. Knob positions 1–16
select groups 1–16.
1.
P
RESS
[#]
TWICE
to select a channel.
2.
P
RESS A NUMBER KEY
for the new
channel number.
3.
P
RESS THE
[
ENT
]
KEY
or wait 5
seconds. The radio returns to normal
operation for the new channel, and the
selected channel is displayed.
• C
USTOM
S
ELECTOR
. Your dealer will
provide you with the pre-programmed
Group/Channel combinations for your
radio.
If a knob position is programmed to allow
selection of the group and/or channel with
the keypad:
1.
P
RESS
[#]
.
2.
P
RESS THE NUMBER OF THE GROUP
you want to change to.
3.
P
RESS
[#]
AGAIN
.
4.
P
RESS THE NUMBER OF THE
CHANNEL
you want to change to.
5.
P
RESS THE
[
ENT
]
KEY
or wait 5
seconds. The radio returns to normal
operation for the new channel, and the
selected channel is displayed.
If the group or channel is locked to a
switch position, pressing
[#]
will only
display the knob-selected value. New
entries will not be accepted.
1
2
3
4
5
6
7
8
9
0
*
#
CLR
FCN
PRI
ENT
