6
RELM/BK Radio
RADIO CONTROLS
BASIC OPERATION
RECEIVE
Turn power on by pushing and releasing the Volume knob. The
1.
radio will beep, indicating that it has passed its self test and is
operational.
Set volume by pressing the
2.
[MON]
button to hear squelch noise.
Turn the Volume knob to set a comfortable volume level. Press
the
[MON]
button again to stop squelch noise.
Select a channel group (if applicable) by pressing the
3.
[GRP]
button and turning the Channel Selector knob. Press the
[GRP]
button again to return to Channel Select mode.
Select a channel by turning the Channel Selector knob. When
4.
the unstopped channel selector is rotated past the highest (16th)
channel, the radio will emit a beep and remain on the highest
channel. When rotated past the lowest (1st) channel, the radio
will emit a beep and remain on the lowest channel.
The display can show channel numbers (Numeric Mode), channel labels
(Alphanumeric Mode), or receive and transmit frequencies. The Display
Mode and Channel Labels are programmed by the technician along
with Group Labels (if applicable) and channel frequencies. The display
shows slightly different indications during Channel Scan and Priority
Scan operation in alphanumeric and numeric modes.
