10
Replacing glass cylinder :
In case the glass cylinder is damaged or broken by very rough handling,
replacement is necessary.
Obtain a new cylinder through the original supplier of the stove. Open heater and
take off the burner basket fitted in the lower part of the chimney. This is a push
fit only and the basket is not screwed on or specially fastened. Remove the
enamelled part of the chimney by unscrewing the six screws which fasten the
three steel supports to the enamelled upper part. Insert new cylinder and screw
on again the supports to the chimney upper part. See to it that after fitting the
glass chimney will be free and not tight, otherwise there is the risk of cracking.
After replacing the burner basket, the heater is ready for use again.
The cylinder is made of heat resistant glass and proof against cold water
splashed and cold air draughts, even when the flame is in the highest position. If
there should be any trouble to obtain a new cylinder, please communicate with
us.
Care and upkeep :
After continuous burning for some length of time, a dullish film may develop on
the enamelled part of the chimney and the glass cylinder. This film can be easily
removed by using a cloth and some soap. The chimney can be cleaned from the
inside by opening the heater and taking out burner basket.
Storage :
When the heater will not be used for a long period, e.g. during the summer
months. It is recommended to empty the container.
