(6)
1) High Level Input connector for connection to amplifier output
2)
3)
4)Low Level Gain Adjust
5)Low Level Filter Bypass - In = Filter in operation - Out = Filter Bypassed.
6)Frequency Contour, set up so as to integrate with main loudspeakers.
7)Continously variable phase control
8)Auto On Function “On-Off” Switch - Up = Active / Down = Disabled (powered on
permanently
9) Power on LED - With power switch in on position and LED “Green” then amplifier is on
w
standby waiting for a signal
10)Power Off/On Switch
11)IEC mains input connector. (Fuse Drawer contains spare 3.15AT fuse)
igh Level Gain Adjust
Low Level Input RCA connectors for connection to pre-amp output, Dolby output or other
dedicated sub outputs
In the Out /
L.F.E. Position the filter is opened wide to allow the optimum performance from processor
ith power switch in on position and LED “Red” subwoofer is in
1
2
3
4
5
6
7
10
8
9
CONTROLS AND THEIR FUNCTIONS
PHASE
0
O
180
O
40Hz
120Hz
FREQUENCY
Min
Max
Min
Max
FILTER
HI LEVEL
INPUT
In
Out / LFE
Min
Max
HI LEVEL
GAIN
LO LEVEL
GAIN
LO LEVEL
INPUT
230V
50-60Hz
T3.15AL
LEFT
RIGHT
(mono)
POWER
MAINS
INLET
ON
TO AVOID RISK OF ELECTRIC PANEL NO USER SERVICEABLE SHOCK
DO NOT REMOVE PARTS INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
AUTO ON
ACTIVE
DISABLED
300W Total Control
S
ub Bass System
P12-300SB-PR
Platinum Series
11
