Operations
43
1. Switch to the channel on the mainframe.
2. Press the
+
key to enter the
Configuration
menu.
3. Select and enter the
SYNC ON SET
submenu.
4. Select
ON
or
OFF
.
5. When enabled, the
key can control the input state of the corresponding module synchronously.
Note:
The same method can be used to set up synchronization with other channels. When in remote control mode, the
SCPI command INPut:ALL ON is used to synchronously load all channels.
4.5 Module VFD Indicator Function Description
Figure
indicates
Figure 4.9
Load Module VFD Panel
L/R
The indicator of the dual-channel module’s left/right channel. If you want to edit left/right channel parameters, first
select the channel using the L/R key. Single-channel module will always display R.
OFF
Indicates that the module input is off. When module input is enabled, OFF indicator will turn off.
Summary of Contents for MDL4U Series
