13
3.4 STATus:OPERation[:EVENt]?
This command query the query operation event register values. The event register is read-only register, which holds
(latches) all value passed by the NTR and, or PTR filter. Read channel operation event register will clear it.
Query Syntax
STATus:OPERation[:EVENt]?
Parameters
None
Example
STAT:OPER:EVEN?
Query Response
<NR1>
Related Commands
*CLS
3.5 STATus:OPERation:CONDition?
This query returns the value of operation condition register. That is a read-only register that holds the real-time
(unlatched) operational status of the electronic load.
Query Syntax
STATus:OPERation:CONDition?
Parameters
None
Example
STAT:OPER:COND?
Query Response
<NR1>
Related Commands
STAT:QUES:COND?
3.6 STATus:OPERation:ENABle <NRf+>
The command is used to set the value of operations enable register. This register is a mask for enabling specific bits
from the Operation Event register to set the operation summary bit (OPER) of the Status Byte register. The operation
summary bit is the logical OR of all enabled Operation Event register bits.
Command Syntax
STATus:OPERation:ENABle <NRf+>
Parameters
0 to 65535
Default Value
0
Example
STAT:OPER:ENAB 32
Query Syntax
STATus:OPERation:ENABle?
Query Response
<NR1>
Related Commands
STAT:OPER?
Default Value
0
