28
Full voltage calibration errors
:
Er 30
: CC not high
Er 31
: CV not low
Er 32
: DAC out of range
Er 33
: ADC out of range
Er 34:
ADC system calibration failed
Er 35
: DAC full voltage constant checksum failed
Er 36
:
ADC full voltage constant checksum failed
Zero current calibration errors
:
Er 40
: CC not low
Er 41
: CV not high
Er 42
: DAC out of range
Er 43
: ADC out of range
Er 44:
ADC system calibration failed
Er 45
: DAC zero current constant checksum failed
Er 46
:
ADC zero current constant checksum failed
Full current calibration errors:
Er 50
: CC not low
Er 51
: CV not high
Er 52
: DAC out of range
Er 53
: ADC out of range
Er 54:
ADC system calibration failed
Er 55
: DAC full current constant checksum failed
Er 56
:
ADC full current constant checksum failed
7.3 Command Errors
”
Communication Error<CR>
”
: RS232 framing, parity, or overrun error
“Syntax Error<CR>”
: invalid syntax was found in the command string
“Out of range<CR>”
: a numeric parameter value is outside the valid range
for the command
