8
March
2017
8808e User Guide
(BB1856-F)
Using the Transducer Control Button
To change the imaging plane, press the button corresponding to that plane (see Figure
1). Pressing the button activates (starts) or freezes (stops) imaging in that plane. One
button enables the sagittal or longitudinal array. A second button enables the
transverse array. Each time a button is pressed, a beep is emitted.
Changing Orientation
To change the orientation of the image on the monitor, refer to the applicable system
user guide for instructions.
Imaging with Type 8808e
Simultaneous Biplane Imaging
8808e can transmit transverse (T) and sagittal (S) images simultaneously. When you
press the system’s
Split
key, simultaneous imaging is automatically activated.
Transverse or Sagittal Imaging
Click
Simultan
to toggle simultaneous imaging on or off. When simultaneous
imaging is off, you can change which plane is active and which is frozen by pressing
the
Split
key or by placing the cursor on the image you want to be active and pressing
the
Select
key.
WARNING
Do not use excessive force during insertion. Do not make excessive lateral movements
during or after insertion. Risk of injury or tissue damage to the patient could occur under
certain circumstances. A digital palpation of the rectum may need to be carried out by a
clinician prior to insertion or use of the probe as a precautionary measure.
