GLP printer driver
Software
6.562.98.5.01.01
-7-
3
Software
These operating instructions are valid as of program version 4.00 of the GLP printer
driver.
Bizerba Windows printer drivers for manual printing systems of the GLP(-W) 80/160
series and the GLP 58 series. With this driver, these printers can be used analog to
desktop print systems. From each Windows based program printouts can be directly sent
to ticket and label printers.
The installation program ("Setup") is available in German or English. The operator
languages are German, English, French, Italian or Spanish.
3.1
Intended use
The GLP printer driver is intended for a GLP 80/160 or 58 printer under Windows. This
driver allows for Windows programs to be printed by GLP units.
3.2
Rights
All rights for the documentation and software program are reserved by Bizerba. The
information in this document may be modified without special notice. Bizerba does not
enter into any commitment with this document.
The rightful purchase of the software licenses and manuals allows the use of the
programs based on the number of licenses. CD copies are only permitted for data backup
(working copies).
3.3
Guaranty
In spite of all efforts we cannot entirely prevent errors in the description. We always value
your comments and suggestions.
We decline any responsibility for damages caused by:
−
non-compliance with these operating instructions.
−
Defective electrical installation.
−
defect programming and operation.
−
modifications of operating system and configuration and on our software and
configuration.
The guaranty does not cover defects/damages caused by access of unauthorized
persons.
We continue with the development of our products which are also subject to different
country regulations. Examples of pictures and graphics contained in these operating
instructions may vary from the version which you receive.
