Bizerba EC II 100, Operating Instructions Manual

Page: 26 / 81

Operating instruction EC II Installation
4 − 4 6.107.98.5.01.44
The equipment is manufactured according to VDE protection class (protective low
voltage) and must be connected to a direct plug−in transformer unit operating with a protective
low voltage.
_______________________________________________________________________
Check before mains connection
Before connecting the device, check
− the power supply data on the designation label
− data on performance plate of plug power pack.
Do not connect the equipment in case of non−conformity.
Contact Bizerba after−sales service.
_______________________________________________________________________
_______________________________________________________________________
Remark for power supplies:
This product is intended to be supplied by a Listed Direct Plug−In
Transformer Unit marked ”Class 2” and rated 12V dc, 800mA (limited
power source).
_______________________________________________________________________
4