Ver. 1.00
-
23
-
SRP-S3000
2. Self-Test
The self-test checks whether the printer has any problems. If the printer does not
function properly, contact your dealer. The self-test procedure is as follows:
How to self-test
1) Turn on the printer. Go to Tool > Print Printer Settings on the LCD screen.
2) Press the Home button (Print) to start self-testing.
3) The printer settings will be printed on the first page followed by interface
information.
4) The self-test process ends automatically after printing wireless interface
information.
• Self
-test print page sample
BIXOLON SRP-S3000 CONFIGURATION
FIRMWARE VERSION
: V01.00 STD 010118
EMULATION
: SLCS & BPL-Z & BPL-C
PRINT DARKNESS
: 0/30
PRINT SPEED
: 5 IPS
TEAR OFF VALUE
: +000 DOT
TEAR OPTION
: TEAR-OFF
PRINT OFFSET
: +0000 DOT
POWER-UP ACTION
: NO ACTION
MEDIA TYPE
: BLACKMARK MEDIA(REAR)
SENSOR TYPE : REAR REFLECT
PRINT METHOD : DIRECT THERMAL
LABEL LENGTH
: 1013 DOT
LABEL WIDTH : 576 DOT
BAUD RATE
: 115200
PARITY
: NONE
DATA BIT(S) : 8
STOP BIT(S)
: 1
HAND SHAKING
: HARDWARE
USB SERIAL NUMBER
: 0000000000001
BPL-Z CODEPAGE : CP-850(SBE. USA-1 CHARSET)
SLCS CODEPAGE
: WCP1252-LATIN1
SLCS ICS
: U.S.A
CONFIGURATION CONTROL STATUS
PRINT SPEED
: COMMAND
PRINT DARKNESS
: COMMAND
PRINT WIDTH
: COMMAND
PRINT OFFSET
: COMMAND
TEAR OFF : COMMAND
MEDIA TYPE : COMMAND
LANGUAGE
: COMMAND
