background image

 

Rev. 1.05 

- 4 - 

SRP-330 

■ 

Warning - U.S.A 

 
This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  A  digital 
device  pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide 
reasonable  protection  against  harmful  interference  when  the  equipment  is  operated  in  a 
commercial  environment.  This  equipment  generates  uses,  and  can  radiate  radio  frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful  interference  to  radio  communications.  Operation  of  this  equipment  in  a  residential 
area is likely to cause harmful interference in which case the user will be required to correct 
the interference at his own expense. 
 
 

 Notice - Canada 

 
This  Apparatus  complies  with  class  “A”  limits  for  radio  interference  as  specified  in  the 

Canadian department of communications radio interference regulations. 
Get  appareil  est  conforme  aux  normes  class  “A”  d’interference  radio  tel  que  specifier  par 
ministre canadien des communications dans les reglements d’interference radio. 
 
 

 Caution 

 
Some  semiconductor  devices  are  easily  damaged  by  static  electricity.  You  should  turn  the 
printer “OFF”, before you connect or remove the cables on the rear side, in order to guard   
the printer against the static electricity. If the printer is damaged by the static electricity, you 
should turn the printer “OFF”. 
 
 

■ 

Waste Electrical and Electric Equipment (WEEE) 

 

This marking shown on the product or its literature, indicates that is should not be 
disposed  with  other  household  wastes  at  the  end  of  its  working  life,  To  prevent 
possible  harm  to  the  environment  or  human  health  from  uncontrolled  waste 
disposal,  please  separate  this  from  other  types  of  wastes  and  recycle  it 
responsibly  to  promote  the  sustainable  reuse  of  material  resources.  Household 
users should contact either the retailer where they purchased this product, or their 

local  government  office,  for  details  of  where  and  how  they  can  take  this  item  for 
environmentally  safe  recycling.  Business  users  should  contact  their  supplier  and  check  the 
terms and conditions of the purchase contract. This product should not be mixed with other 
commercial wastes for disposal. 
 
 

 Rating Label Symbol Information 

 

  DC (Direct current) 

 

 

Summary of Contents for SRP-330
























Reviews: